Sign In | Join Free | My burrillandco.com
Home > Automotive Assembly Adhesive >

8906 PU Primer For Automotive Assembly Adhesive Boost Bonding Strength And UV Resistance With Huitian

    Buy cheap 8906 PU Primer For Automotive Assembly Adhesive Boost Bonding Strength And UV Resistance With Huitian from wholesalers
     
    Buy cheap 8906 PU Primer For Automotive Assembly Adhesive Boost Bonding Strength And UV Resistance With Huitian from wholesalers
    • Buy cheap 8906 PU Primer For Automotive Assembly Adhesive Boost Bonding Strength And UV Resistance With Huitian from wholesalers

    8906 PU Primer For Automotive Assembly Adhesive Boost Bonding Strength And UV Resistance With Huitian

    Ask Lasest Price
    Brand Name : Huitian
    Model Number : 8906
    Price : Negotiated
    Payment Terms : L/C, T/T
    Supply Ability : 50,000 Pcs/M
    Delivery Time : 7-15days
    • Product Details
    • Company Profile

    8906 PU Primer For Automotive Assembly Adhesive Boost Bonding Strength And UV Resistance With Huitian


    Huitian® 8906 PU primer is a black, moisture-curing liquid primer. It is specially formulated for the preparation of the bonding surface before using Huitian PU adhesive in glass bonding operations, to improve the PU adhesive’s bonding strength and UV resistance.

    Typical Applications

    This product is used to improve the adhesion between the adhesive and the glass or ceramic printing edge in bonding operations, and can also be used for the treatment of some metals.

    For special materials, to ensure the bonding effect and the compatibility of the product with the material, it is necessary to test based on the actual substrate and environment in advance. Please contact the technical service department of Huitian.


    Technical Parameters

    Technical ParametersTypical ValueRange
    AppearanceBlack liquid-
    Chemical compositionPolyisocyanate-

    Density (g/cm³)

    (GB/T13354-1992)

    1.00.9~1.1

    Viscosity (mPa.s)

    (GB/T2794-1995)

    1010~50
    Flash point (℃)-4-
    Coverage (ml/m²)-50~150
    Application temperature (℃)-10~35
    Drying time (min)--
    At least (above 15°C)10-
    At least (below 15°C)30-
    Maximum-24h

    Directions for Use

    Drying time: The normal drying time is 3~5 minutes, depending on the ambient temperature. Do not start gluing until the primer volatilizes and dries (10 minutes recommended).

    Usage: The bonding surface must be clean and dry, without oil or dust. Wipe the surface with Huitian activator 8902 and allow it to dry. Shake Huitian 8906 well until you can hear the balls in the can roll freely. Continue to shake for 1 minute. Then apply the primer evenly to the bonding surface.

    Optimal application environment: Ventilated environment at 15~25°C.

    Storage & Transportation

    Recommended transportation environmentOptimal environment: 5~25°C, <70%RH; avoid sunshine, rain, humidity, impact, and extrusion of packing.
    Recommended storage temperature5~25°C
    Storage environmentCool, dry
    Shelf life9 months

    Packing Specification

    890604, 250ml/ can, 24 pcs/carton


    Cautions

    Keep away from children for storage.

    If the eyes are accidentally exposed to the product, rinse immediately with water, and seek medical attention.

    It is recommended that the product be used in a well-ventilated place.

    Please consult the MSDS of the product for safety information.


    Waste Disposal

    If not polluted by other substances, the waste can be stacked in landfills in principle and will not pollute water quality. Since the product can be burned, the waste can be disposed of in a waste incineration plant. Undoubtedly, it is necessary to abide by the environmental regulations of the local government.


    Health And Safety Information

    Before operating this product, it is necessary to get familiar with its hazards, proper use and disposal, and other relevant information. The following information may be useful: Material Safety Data Sheets (MSDS) and product classification marks. For more detailed information, contact your sales representative or technical service representative.

    Name890289068906P8906G
    CategoryActivatorGeneral PrimerBody primer (organic)Glass, electrophoretic paint, and other primers
    SubstrateCollocation
    Glass8902+8906/8906G+8960H/8965 (Conventional)
    8902+8906G+8960H/8965/8950 (Special solution for inorganic
    materials)
    Body8902+8906/8906G+8960H/8965 (Conventional)
    8902+8906P+8960H (Passenger car)
    8902+8960S/8966 (Passenger car body without primer)
    8906G/8906/8902 Huitian PU adhesive primer and activator and cleaner system!
    Quality 8906 PU Primer For Automotive Assembly Adhesive Boost Bonding Strength And UV Resistance With Huitian for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Shanghai Huitian New Material Co., Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)