Sign In | Join Free | My burrillandco.com
Home > Automotive Adhesive >

Single Component Polyurethane PU sealant Automotive Adhesive glue for plastic car parts

    Buy cheap Single Component Polyurethane PU sealant Automotive Adhesive glue for plastic car parts from wholesalers
     
    Buy cheap Single Component Polyurethane PU sealant Automotive Adhesive glue for plastic car parts from wholesalers
    • Buy cheap Single Component Polyurethane PU sealant Automotive Adhesive glue for plastic car parts from wholesalers
    • Buy cheap Single Component Polyurethane PU sealant Automotive Adhesive glue for plastic car parts from wholesalers

    Single Component Polyurethane PU sealant Automotive Adhesive glue for plastic car parts

    Ask Lasest Price
    Brand Name : Huitian
    Model Number : 8921U
    Certification : TS16949
    Price : Negotiation
    Supply Ability : 300,000 pcs per month
    Delivery Time : 8-12 days
    • Product Details
    • Company Profile

    Single Component Polyurethane PU sealant Automotive Adhesive glue for plastic car parts


    8921u , PU sealant, for Seal bus air conditioning, weld, luggage and other parts. Deal ships, locomo


    8921U performance polyurethane sealant is a single component, W High thixotropy, does not flow, low odor polyurethane adhesive. Product is low viscosity, good thixotropy, which is convenient for manual gluing. Cured adhesive is elastomers, anti cold and hot change, good resistance to stress change performance. Can be painted, polished, no corrosion, elevation and top construction does not flow. There is extensive adhesion to various substrates.


    Typical use

    Seal bus air conditioning, weld, luggage and other parts. Deal ships, locomotives, construction, paint and other industries and other usage of low bond strength.


    Characteristic before curing

    Representative value range

    A component

    Color White/black/grey/iron grey

    Density g/cm3(25) 1.30 1.251.35

    (GB/T13354-1992)

    Touch Curing(min) 50 4060

    (23/50%RH)

    (GB/T13477.5-20)


    Characteristic after curing

    Tensile strength MPa 1.8 1.5 2.5

    (GB/T528-1998)

    Elongation at break (%) 500 450 700

    (GB/T528-1998)

    Tear strength KN/m 8 ≥7

    (GB/T 529)

    Harness: Shore-D(GB/T 531-1999) 40 3050

    Work Temperature -4090


    Instructions for use

    Surface cleaning: clean surface: remove the rust, dirt, water and oil etc...

    Gluing: cut a small hole in the beak suitable rubber barrel, glue mouth diameter should be considered sizing width and decide, into the glue gun start sizing operation.

    Curing: a large temperature and humidity environment on polyurethane adhesive surface drying and curing effect, low temperature, curing slow; temperature and humidity is too high, dry too fast. The best operating environmental conditions: temperature 20 to 30 DEG C for 50 ~ 70%RH, humidity exceeds 5 to 35 DEG C; the temperature, humidity 35 ~ 75%RH range please careful construction.

    Polyurethane adhesive in gluing and curing process, avoid contact with chemicals containing hydroxyl, amino and, this kind of material will cause the polyurethane glue curing incomplete.

    Storage: unused plastic blocks should be tightened immediately, to seal the tube mouth save. Again, if sealed, a little crust, remove immediately after, does not affect the normal use. In the process of storage, the nozzle may also appear a few crusts, remove after normal use, does not affect the product performance.


    The matters needing attention


    Keep away from children.


    If you accidentally come in contact with the skin, wipe in the curing a cloth before class, and using alcohol solvent scrubbing.

    If the case of contact with eyes, rinse immediately with water, and medical treatment.

    Recommended for use in a well ventilated place

    Product safety data please refer to the product MSDS.


    Package

    310ml/Tube,24tube/Carton

    600ml/Soft tube 20tube/Carton


    Storage

    Store in cool and dry place 5-25 C (humidity less than 70% RH)

    Storage period: Hard pack for 9 months

    Soft pack for 6 months

    Single Component Polyurethane PU sealant Automotive Adhesive glue for plastic car partsSingle Component Polyurethane PU sealant Automotive Adhesive glue for plastic car parts

    Quality Single Component Polyurethane PU sealant Automotive Adhesive glue for plastic car parts for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Shanghai Huitian New Material Co., Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)