Sign In | Join Free | My burrillandco.com
Home > Automotive Assembly Adhesive >

8667 Good Adhesion To Most Plastic Substrates (Polyester, PP, LGF, SMC, ABS, ASA, PC,Etc.) After flame or plasma treat

    Buy cheap 8667 Good Adhesion To Most Plastic Substrates (Polyester, PP, LGF, SMC, ABS, ASA, PC,Etc.) After flame or plasma treat from wholesalers
     
    Buy cheap 8667 Good Adhesion To Most Plastic Substrates (Polyester, PP, LGF, SMC, ABS, ASA, PC,Etc.) After flame or plasma treat from wholesalers
    • Buy cheap 8667 Good Adhesion To Most Plastic Substrates (Polyester, PP, LGF, SMC, ABS, ASA, PC,Etc.) After flame or plasma treat from wholesalers

    8667 Good Adhesion To Most Plastic Substrates (Polyester, PP, LGF, SMC, ABS, ASA, PC,Etc.) After flame or plasma treat

    Ask Lasest Price
    Brand Name : Huitian
    Model Number : 8667
    Price : Negotiated
    Payment Terms : L/C, T/T
    Supply Ability : 300,000 Pcs/M
    Delivery Time : 15 days
    • Product Details
    • Company Profile

    8667 Good Adhesion To Most Plastic Substrates (Polyester, PP, LGF, SMC, ABS, ASA, PC,Etc.) After flame or plasma treat

    8667 TDS-EN-R.pdf


    Huitian® 8667 is a two-component polyurethane bonding adhesive that can bond a wide range of materials. Good adhesion to most plastic substrates (Polyester, PP, PP+LGF, SMC, ABS, ASA, PC+ABS, PC, etc.) after flame or plasma treatment.


    Typical applications

    Bonding of steel plates, aluminum plates, galvanized steel plates, cement, ceramics, wood, glass, glass steel and other materials.


    Properties before curing

    Typical value Range

    Appearance Part A: Black

    Part B: Beige

    Chemical composition Part A: Hydroxyl

    Part B: Isocyanate prepolymer

    Density (g/cm3) Part A: 1.2-1.3

    Part B: 1.4-1.5

    Viscosity Pa·s Part A: 30-50

    (Brookfield RVT7# Part B: 20-40

    50RPM, 25℃)


    Properties after curing

    Typical value Range

    Operating time (min) 4 3-5

    Position time (min)* 30 28-35

    Cure time (d) 3 (@25℃) ≥3

    Shear strength

    (25±2℃, 3d) MPa 3 ≥3.0

    Tensile strength

    (25±2℃, 3d) MPa 4 ≥3.5

    Elongation at break 200% ≥180%

    Hardness (Shore A) 70 65~75

    *25 ℃ curing 30min to achieve the initial bonding strength, increase the curing temperature, can shorten the time to achieve the initial bonding strength, 60-80 ℃ curing 2-5min can achieve the initial bonding strength.


    Directions For Use

    Clean-up: Clean up the surface to be bonded, making it clean and dry, flame or plasma treated.

    Glue preparation: Prepare the glue as per the ratio of A: B=0.85:1(W/W) 1:1(V/V) and mix evenly.

    Gluing: Evenly apply the mixed glue on the part to be glued, and the mixed glue color is gray.

    Curing: Determine the appropriate pressing temperature and time according to the actual process rhythm, otherwise bonding failure may occur.


    Cautions

    Keep away from children for storage.

    If eyes or skin are accidentally exposed to the product, rinse immediately with water.

    Please consult the MSDS of the product for safety information.


    Storage & Transportation

    Recommended transportation environmentOptimal environment: 8~28°C, <70%RH; avoid sunshine, rain, humidity, impact, and extrusion of packing.
    Recommended storage temperature8~28°C
    Storage environmentCool, dry
    Shelf life6 months

    Packing Specification

    Dual Cartridge: 400 ml

    8667 A: 23kg/barrel 8667 B: 27kg/barrel


    Waste Disposal

    If not polluted by other substances, the waste can be stacked in landfill in principle and will not pollute water quality. Since the product can be burned, the waste can be disposed of in a waste incineration plant. Undoubtedly, it is necessary to abide by the environmental regulations of the local government.


    Health And Safety Information

    Before operating this product, it is necessary to get familiar with its hazards, proper use and disposal, and other relevant information. The following information may be useful: Material Safety Data Sheets (MSDS) and product classification marks. For more detailed information, contact your sales representative or technical service representative.

    Quality 8667 Good Adhesion To Most Plastic Substrates (Polyester, PP, LGF, SMC, ABS, ASA, PC,Etc.) After flame or plasma treat for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Shanghai Huitian New Material Co., Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)