Sign In | Join Free | My burrillandco.com
Home > Automotive Assembly Adhesive >

8965 One component PU Polyurethane Windshield Adhesive , automotive glass bonding sealant adhesive

    Buy cheap 8965 One component PU Polyurethane Windshield Adhesive , automotive glass bonding sealant adhesive from wholesalers
     
    Buy cheap 8965 One component PU Polyurethane Windshield Adhesive , automotive glass bonding sealant adhesive from wholesalers
    • Buy cheap 8965 One component PU Polyurethane Windshield Adhesive , automotive glass bonding sealant adhesive from wholesalers

    8965 One component PU Polyurethane Windshield Adhesive , automotive glass bonding sealant adhesive

    Ask Lasest Price
    Brand Name : Huitian
    Model Number : 8965
    Price : 100
    Payment Terms : T/T, D/P, D/A, L/C
    Supply Ability : 500000pcs per month
    Delivery Time : 15 days
    • Product Details
    • Company Profile

    8965 One component PU Polyurethane Windshield Adhesive , automotive glass bonding sealant adhesive

    8965 one-component polyurethane adhesive is a one-part, black, fast-curing, low odor
    polyurethane adhesive. After curing, the adhesive layer is an elastomer, which has good resistance
    to cold and heat changes, and resistance to stress changes. Suitable for gluing with pneumatic glue
    gun or mechanical gluing, short positioning time and easy applicaton.
    How to use
    Cleaning: Clean the surface to be bonded,remove rust, dust, water and oil. Glue: Cut a suitable small hole on the tip of the glue barrel, the inner diameter of the mouth of the
    glue nozzle should be determined by the glue application width, put it into the glue gun and start
    the glue application operation. Primer:It needs to be used with Huitian designated activator and primer. The time for the primer
    to wait for volatilization and drying is usually 10-30 minutes. The specific time depends on the
    ambient temperature at that time. After the primer is volatilized and dried, the glue is applied. Cure: The temperature and humidity of the environment have a great influence on the surface
    drying and curing of the polyurethane adhesive. If the temperature is too low, the curing will be
    slower; if the temperature and humidity are too high, the surface drying will be faster. The best operating environment conditions are: temperature 20~30℃, humidity 50~70%RH;please operate with caution beyond the range of temperature 5~35℃ and humidity 35~75%RH. During the sizing and curing process of polyurethane adhesive, avoid contact with chemicals
    containing hydroxyl and amino groups, which will cause the polyurethane adhesive to not cure or
    cure incompletely. Storage:Unused glue should immediately tighten the cap and seal the nozzle for storage. When
    using it again, if there is a little crust on the seal, it can be removed without affecting normal use. During storage, there may be a small amount of crust on the mouth of the nozzle, which can be
    used normally after removal without affecting the performance of the product.
    8965 One component pu sealant adhesive was well accepted by many OEM , High performance and fast positioning !
    Quality 8965 One component PU Polyurethane Windshield Adhesive , automotive glass bonding sealant adhesive for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Shanghai Huitian New Material Co., Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)